Automatic Pet Feeder First Setup: A Practical Checklist
Start with the model printed on your feeder’s label. F07 and F07 Pro are different models, and a similar-looking camera feeder may use different controls or software. Choose the matching manual in the Help Center before assembly.
1. Check the model and prepare the feeding station
Keep the order information and photograph the model label. Choose a stable, dry indoor surface where the outlet stays accessible and the pet can comfortably reach the bowl. Keep cables out of chewing reach. Before connecting power, remove packing materials and inspect the adapter and cable for damage.
2. Assemble only as the manual shows
Fit the bowl and hopper using the instructions for your exact model. Do not guess a locking direction or force a part into position. Keep desiccant packets in their designated compartment, out of reach of pets and children. Never put a packet loose into the food or bowl.
Use the food type and kibble size specified in the matching manual. Do not add wet, moist or sticky food to a dry-food feeder. Clean only the removable parts that the instructions identify as washable, and dry them fully before refilling; keep the motor base, power connections and camera dry.
3. Confirm power and app requirements
Use the specified adapter and follow the battery instructions if your model supports backup power. Backup batteries may not support every connected feature. Download the app named in the model’s manual or supplied QR code rather than choosing an app by a similar name. Only use the Wi-Fi band supported by that specific feeder.
4. Measure a portion before setting meals
Place an empty bowl or container under the outlet and run a supervised manual feed following the manual. Weigh the output with a kitchen scale. Repeat several times with the kibble you actually use: a portion setting is not a universal gram weight. Convert your pet’s planned daily food amount into settings using the food label and your veterinarian’s advice where needed.
5. Test a scheduled meal while you are home
- Check the feeder’s clock, time zone, meal times and portion settings.
- Schedule a small test meal and watch the food reach the bowl. Check both bowls on a dual-bowl model; do not assume every dispense divides equally.
- Confirm the lid and hopper are seated correctly and the outlet is unobstructed.
- After any power interruption, router change or schedule edit, verify the next meal in person.
Before leaving the feeder unattended
Watch several normal meals before relying on the setup. Check remaining food, power, clean water and normal operation every day, and arrange someone to check your pet when you are away. An app status or camera view alone cannot prove that a pet received and ate its planned meal.
