WOPET W03L / W03 Lite User Manual

← All user manuals · Product support

Wired 3L ceramic fountain. This page follows the W03 Lite PDF linked in the Help Center; it is not the cordless W03 manual.

Read this web edition in English. Open or download the original PDF for the original document and any additional languages. Check the model, hardware revision and supplied instructions before use.

Specifications

Item	Manual specification
Capacity	3L / 101oz
Power input	DC 5V / 1A
Body	Ceramic with ABS components
Power arrangement	Wired

Safety instructions

Use a compliant DC 5V / 1A adapter. Use only attachments recommended or sold by WOPET. Do not modify the electrical components or structure.
Use indoors only, with water in the tank. Do not operate a damaged or malfunctioning unit; contact customer service.
Unplug before attaching, removing or cleaning parts and when the appliance is not in use. Keep the adapter and plug dry; never pull the cord to unplug.
If a plug becomes wet, switch off power to the outlet before handling it. Do not let pets chew or swallow components.
Protect the unit from weather and freezing conditions. Use an appropriately rated extension cord only where permitted.

Product overview

The assembly drawing identifies the spout, ceramic tray, primary filter cotton, tray holder, columnar core filter, foam filter, wired pump and ceramic tank. Check the supplied components before starting.

First setup

Rinse the ceramic tray and tank with clean water.
Connect the columnar core filter to the pump, then place the pump in the center of the tank.
Fill the tank within the 1.5–3L range shown in the manual. Install the tray holder, primary filter cotton, ceramic tray and spout in the illustrated order.
Connect the pump cable to the specified adapter and power outlet. Do not immerse the adapter. Observe the fountain after assembly.

Pump indicator lights

Blue: the fountain is operating normally.
Red: check the water level and add water if needed. Disconnect power and clean the filter cotton and impeller if a blockage is indicated.

Filter replacement

Primary filter cotton: replace every 1–2 weeks under normal conditions.
Columnar core filter: replace every 2–4 weeks under normal conditions.
For multiple pets, the manual recommends replacing the filter every two weeks. Match the consumable and schedule to your version.

Pump and spout cleaning

Disconnect power. Remove the foam filter, pump cover and impeller cover in sequence.
Use the cleaning brush hook to lift out the impeller. Brush the accessible parts with water as shown in the manual, then reassemble.
Clean the foam filter regularly; its condition affects flow. Replace it when needed.
Use the brush to clean the spout. The manual recommends spout cleaning every two weeks.

Troubleshooting

If the fountain does not run, check the compatible adapter, cable connections and power supply.
If the pump indicator is red, check water level and clean the filter cotton and impeller after disconnecting power.
If flow slows, inspect the pump for dirt and follow the pump-cleaning sequence. For persistent residue or an unresolved fault, contact support with the model label.

Warranty and support

The PDF lists 30-day return and replacement information, a standard one-year product warranty and an application for two-year coverage through registration within 30 days of receipt.
Complimentary parts, replacements and consumables are excluded from the stated two-year coverage. Terms depend on use and purchase source; confirm eligibility with the seller.
Email support@wopet.com. For Amazon orders, open Your Orders → View order details → Seller name → Ask a question.

Regulatory notices

The source manual includes FCC Class B / Part 15 notices. Unauthorized changes or modifications can void authority to operate the equipment. The document notes that interference can still occur in a particular installation.

If interference occurs, the manual lists reorienting or relocating the receiving antenna, increasing separation from the receiver, using an outlet on a different circuit, or consulting a dealer or radio / TV technician.
Use the original PDF for the full compliance notice, including any cable and antenna requirements. Specifications and illustrations may change between revisions.