WOPET A08 User Manual
← All user manuals · Product support
8L wired pet water fountain. The source PDF is a single folded sheet; instructions below have been reordered into reading order.
Read this web edition in English. Open or download the original PDF for the original document and any additional languages. Check the model, hardware revision and supplied instructions before use.
On this page
- Specifications
- Safety and care notices
- Accessories and assembly
- Disassembly and pump cleaning
- Water, filter and cleaning schedule
- Support and claims
- Original diagrams and PDF
- Related help
Specifications
| Item | Manual specification |
|---|---|
| Capacity | 8L |
| Power supply | DC 5V; manual recommends a 1A or 2A adapter |
| Rated power | 1W |
| Product weight | 1.4kg / 3.1lb |
| Dimensions in manual | 9.5 × 5.9 × 14.8in / 24.2 × 15 × 37.7cm |
Safety and care notices
- Turn off power before installing, cleaning, adding water or restarting after cleaning. Keep electrical connections dry.
- Prevent pets from chewing or swallowing components. If cable protection is needed, use suitable protective wire guides.
- Do not repair a faulty or damaged fountain yourself; contact support.
- Allow pets time to become familiar with the fountain while keeping another water source available.
Accessories and assembly
- The parts list includes the faucet, water cover, storage tank, filter upper cover, filter element, filter tray, water-guide silicone tube, wired pump, adapter, manual, pump-cleaning brush and two anti-slip foot mats.
- Rinse the filter element for 30 seconds before use. Place it in the filter tray and fit the filter cover as shown in the source drawing.
- Install the water-guide silicone tube, position the wired pump and secure the cable in its guide.
- Add the appropriate amount of water, install the top cover and faucet, then connect the USB power cable to the DC interface and power supply.
- Use the original drawing to check the tube, pump and cover positions before switching on.
Disassembly and pump cleaning
- Switch off and disconnect power. Remove the outlet, then tilt the top cover until water drains off it before lifting it away.
- Remove and clean the pump sponge. Remove the pump cover and impeller cap as shown in the manual.
- Clean the accessible pump components and internal surfaces with the supplied brush. Reassemble the parts correctly before refilling and restarting.
Water, filter and cleaning schedule
- This edition gives several care intervals: the warning panel says to change the filter and clean the pump at least every two weeks; a tips panel recommends filter replacement every 1–2 weeks.
- Its additional notice recommends changing water and cleaning the fountain and pump at least weekly, and mentions approximately 12 days for filter replacement in most cases.
- Use the more frequent inspection and care routine when several pets share the fountain or debris builds up. Ask support if you need clarification for your revision; do not treat these as instructions for other models.
Support and claims
- Email support@wopet.com with the model, order details and issue. For an Amazon order, open Your Orders → View order details → Seller name → Ask a question.
- The linked sheet includes the original accessories, assembly and pump-cleaning illustrations. Check them before removing components.
Original diagrams and PDF

Open or download the original A08 manual (PDF)
Related help
A08 product support and related guides · Help Center · All user manuals